Lanner MR-330A - Manual (Page 3)

1
Introduction
Chapter 1
Network Application Platforms
Chapter 1:
Introduction
Based on a new generation high-performance OCTEON
network processors ( Models have CN5020 series dual core
MIPS processor), the MR-330A offers up to 2 cnMIPS64
cores on a single chip. The chipset supports a variety of
I/O interfaces including Gigabit Ethernet, USB and Mini-
PCI interfaces. The built-in encryption, TCP acceleration,
and QoS engine provide reliable security functions at top
speed. Owing to its highly-integrated hardware support of
queuing, scheduling and low latency for real-time traffic,
the device is even a perfect platform for high quality voice,
video and data services .
The Quick Start Guide will takes you through the basic
steps necessary to install your MR-330A System.
Please refer to the chart below for a summary of the
system’s specifications.
System Specification
Features Descriptions
Form Factor 1U Rackmount
Platform
Processor
OCTEON CN5020
Max Speed 700MHz
Processor Cores 2
Instructions per
Second (Max)
2.8B
Encryption Engine Yes
Networking Engine Yes
QoS Engine Yes
TCP Acceleration Yes
System Memory
Technology DDR2 400MHz
Capacity 1GB
Storage
Storage Interface CompactFlash (type II) x 1
Serial-ATA
NOR Boot Flash 8 MB
Networking
No. of ports (Max)
Combo ports (RJ45x2, SFPx2)
4 GbE switch
Controller
Marvell 88E1111 (RGMII
interface), Marvell 88E6161
(RGMII interface)
I/O Interface
Console DB9 x 1
USB 2.0 1
Expansion Mini-PCI x 1
Cooling Processor Passive CPU heatsink
Environmental
Parameters
Temperature,
Ambient Operating
0~40°C
Temperature,
Ambient Storage
-20~70°C
Humidity (RH),
Ambient Operating
and Non-Operating
5% ~ 95%, non condensing
Internal RTC
Yes
Physical
Dimensions
Dimensions (WxHxD) 431 x 44 x276.7mm
(16.97x1.73x10.89in)
Weight 3.5Kg
Power
Type / Watts 100W Single AC Power Supply
Input 100~240V / 60~50Hz /3~1.5A
Approvals &
Compliance CE Emission, FCC Class A,
RoHS
Ordering System
MR-330A:
CN5020-700, 1GB