Laney LR5 - Manual (Page 16)

MIC VOLUME: Controls the volume of the Mic connected to
the Mic Input Socket. This control is independent from the
instrument volume control on the fascia.
MIC SOCKET: Connect a microphone here. Please note the
following when a mic is connected to the amp:
The location of the microphone relative to the amp could cause
feedback as could the volume level being too high. Both are
easily remedied.
Use a Dynamic Mic only, you can not use a condenser mic or a plug-in powered mic that requires a power
supply.
HEADPHONE/RECORD OUT: A rear panel 6.35” stereo jack is provided
for headphone use. This output may also be used to connect to a mixing desk
for recording if required.
(The internal speaker is automatically disconnected when using phones.
If your Phones have a 3.5mm jack an adaptor will be required)
SECURITY SLOT: You can connect commercially available anti-theft cables and other security
devices to the amp.
See http://www.kensington.com/
SERIAL NO: Displays the model and serial number of the unit.
TIP
TIP
TIP