Jordan Valve Mark 80 Series – Self Operated Temperature Regulator - Manual (Page 2)

Ordering Spare Parts
Use only genuine Jordan Valve parts to keep your valve
in good working order. So that we can supply the parts,
which were designed for your valve, we must know ex-
actly which product you are using. The only guarantee to
getting the correct replacement parts is to provide your
Jordan Representative with the valve serial number. This
number is located on the valve identification tag. If the
serial number is not available, the parts needed for your
valve might be determined using the following informa-
tion: Model Number, Valve Body Size, Seat Material and
Cv Rating, Spring Range and Set Point, Trim Material, Part
Name - Number and Quantity.
NOTE: Any parts ordered without a valve serial number
that are found to be incorrect are subject to up to a
minimum 25% restock charge when returned.
3170 Wasson Road • Cincinnati, OH 45209 USA
Phone 513-533-5600 • Fax 513-871-0105
[email protected] • www.jordanvalve.com Bulletin IM-MK80Supp-0909
Illustration and Parts List
Item Description
2S Spring
1Y Yoke
2Y Yoke Screw
3Y Adjusting Post
4Y Jam Nut
5Y Adjusting Wheel
6Y Spring Washer
7Y Actuator Screw
9Y Actuator Stem
10Y Stem Connector
11Y Stem Connector Nut
12Y Stem Connector Bolt
13Y Stroke Stop Nut
14Y Lockwasher
1A Actuator Assembly
2A Stroke Stop
3A1 Diaphragm Plate
3A2 Diaphragm Plate Plug
4A Adaptor Mounting Plate
5A Mounting Plate Screw
1 Capillary
2 Armor
3 Retaining Ring
4 Short Adaptor
5 Retaining Ring
6 Bulb Nut
8 Tank Fitting
9 Bulb Assembly
1
1A
9
8
6
5
4
3
2
4A
7Y
2S
5Y
6Y
3Y
4Y
9Y
5A
2A
14Y
11Y
10Y
12Y
13Y
14Y
3A2
3A1