Hongdian H8922 Dual SIM Single Module - Manual (Page 102)

1 Product Introduce H8922 3G/4G Router
1 -66 (2014-05-28)
Table 5-35 Tunnel rule parameter instruction
Parameter Details Operation
IP Tunnel
Service To enable or disable IP tunnel
service Click “Enable”
Basic Settings
Tunnel name Name of the tunnel, cannot be
modified after save Input the name of tunnel
Tunnel Mode Tunnel mode:
 gre

ipip
Select from Dropdown List
Local virtual IP Virtual IP address of local tunnel Format: interface type
A.B.C.D/M.
Peer virtual IP Virtual IP address of peer tunnel Format: interface type
A.B.C.D/M.
Interface type To choose “interface” or “static IP” Select from Dropdown List.
Local Extern
interface This parameter will need to be set if
“interface” is selected in “interface
type”. Choose any connected
interface as external interface Select from Dropdown List.
Local extern IP This parameter need to be set if
“static IP” is selected for “interface
type”. It is to set IP address to
external network Format: interface type
A.B.C.D/M.
Peer extern IP External interface IP of counterpart
network tunnel. Usually a public IP
address, also can be a LAN IP Format: interface type
A.B.C.D/M.
Step 5 Single click “save” icon to finish.
---END
5.6.4 IPSec configuration
Step 1 Log-on WEB GUI of H8922 3G/4G router.
Step 2 Click “VPN > IPSec” to open “IPSec” tab.