5 installation procedure – Yaskawa V1000-Series Option SI-EM3D/V Dual Port EtherNet Modbus TCP/IP Technical Manual User Manual
Page 19
V1000
M
U/T1
V/T2
W/T3
R/L1
S/L2
T/L3
SI-EM3D/V
Modbus TCP/IP
Option
FE
<1>
Modbus
TCP/IP Cable
Motor
Power
Modbus
TCP/IP Cable
Figure 20 Option Connection Diagram
15.
Use the second communication cable port to daisy chain a series of drives where applicable.
16.
Attach the option cover by aligning the tabs with the mounting holes, seat the front cover into place, and tighten the
screw on the front.
Line up tabs
Figure 21 Attach the Option Cover
Note:
Take proper precautions when wiring the option so that the front covers will easily fit back onto the drive. Make sure no cables
are pinched between the front covers and the drive when replacing the covers.
17.
for proper option performance.
5 Installation Procedure
YASKAWA SIEP YAICOM 17A V1000 Option Dual-Port Modbus TCP/IP SI-EM3D/V Technical Manual
19