Yaskawa V1000 Option 24 V Power Supply - Manual (Page 22)

5 Installation Procedure
22 YASKAWA ELECTRIC TOBP C730600 27B V1000 Option PS-V10 Installation Manual
◆
Make Cable Connections to the 24 V Power Supply Option
(PS-V10S)
If you are installing the PS-V10M 24 V Power Supply Option, proceed to Make Cable
Connections to the 24 V Power Supply Option (PS-V10M) on page 24
1. Position the drive on its side or its back as shown in Figure 15 . Twist the cable with black
connector ends 180 degrees.
2. Next, plug the unit connection cable into the black connector socket CN3-1 labeled “TO
POWER BOARD” on the 24 V Power Supply Option and plug the remaining cable into the
white connector socket CN3-2 labeled “TO CONTROLLER” on the 24 V Power Supply
Option.
Figure 15
Figure 15 Plugging the Connector into the 24 V Power Supply Unit (PS-V10S)
(connecting the power board)
Twist 180
°