Yaskawa AO-12B2 - Manual (Page 10)

Page 10 VS-616/676 Series Option Instruction Manual: Isolated Analog Monitor Card AO-12B2
* Default is 4-20mA setting.
EXTERNAL TERMINAL FUNCTIONS
AO-12B2 Monitor Card has three (3) output terminals for connection to peripheral equipment.
* The signal monitored on TB1-1 or TB2-1 can be selected by setting the inverter’s program param-
eters. For details, refer to the specific “PROGRAMMING SETTINGS” tables.
• Output analog signal levels of TB1-1 or TB1-2 can be adjusted by setting the inverter program
parameters. For details, refer to “OUTPUT SIGNAL LEVEL SETTING”.
• When AO-12B2 is mounted on VS-616G3 or VS-616H3, the output signal level varies 0 to
+10 volts. In this case, negative polarity (0 to -10) cannot be output.
• Output signal level can be adjusted to a maximum of 10 volts by setting program constants.
Table 5: Channel Two Jumper Selections
Signal Level HDR3 Jumper Positions HDR1 Jumper Positions
Voltage (-10 to 10)
Current
0-20mA
4-20mA*
Table 6: Terminal Functions
Terminal
Symbol
Function Signal Level
Output
Accuracy
Remarks
TB1-1
Analog signal
output: channel 1*
Selectable by jumpers
-10+10 VDC
0-20mA
4-20mA Refer to the
following
programming
setting tables
Output
resolution:
11 bits +SIGN
(1/2048) TB1-2
Analog signal
output: channel 2*
TB1-3 Common terminal 0 volts -- --
1 to 3
HDR
3 2 4 6
1 3 5
4 to 6
1 to 3
HD
R
1
1 3 5
2 4 6
2 to 4
3 to 4
5 to 6 HD
R3
1 3 5
2 4 6
HDR1
2 4 6
1 3 5
4 to 6
3 to 5
4 to 6
1 to 3
HD
R
3
1 3 5
2 4 6