3 receiving, Di-101 option package contents, Tools required for installation – Yaskawa 120 Vac Digital Input User Manual
Page 8: 3receiving
8
YASKAWA TOEP YEAOPT 07 A1000 Option DI-101 120 Vac Interface Installation Manual
3 Receiving
3
Receiving
Please perform the following tasks upon receiving the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the option
packaging. (Refer to
on page
for more information)
• Contact your supplier if you have received the wrong model or the option does not
function properly.
◆
DI-101 Option Package Contents
◆
Tools Required for Installation
• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the
option.
• A straight-edge screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is required to wire the
option terminal block.
Note: Tools required to prepare option cables for wiring are not listed in this manual.
Description:
PCB 120 V Interface Card
UTC000450,RB
Installation Manual
–
Quantity:
1
1
S1 S2 S3 S4 S5 S6 S7 S8 SN
MANUAL