EverFocus EZ630 - Manual (Page 32)

32
d. Move the joystick RIGHT ( ) and LEFT ( ) to adjust the mode and parameters of the
selected item.
Press “Menu” to leave and goes to previous menu after setting. Move to “exit” and press “menu”
button when you finish all settings.
For detail setting of each setup function, Please refer to “3.3. OSD Menu Setup”.
4.1.3 Lens Adjustment by Keyboard
1. Press Zoom in or Zoom out to adjust zoom; or turn the Joystick clockwise to zoom out, and
counterclockwise to zoom in.
2. Press Focus N or Focus F to adjust focus.
4.2 Remote Control with EverFocus DVR
4.2.1 RS-485 Wiring
The connection to the DVR depends on DVR type. The EverFocus EDSR and EDR series (MPEG4)
provide 2 looped RJ45 sockets with same pinout as EKB-500 keyboard (chapter 4.1.1). The DVR of
Paragon and ECOR series as well as EverFocus video server have 2-pin screw terminal connectors
for RS-485 interface.
4.2.2 Camera Operation and Setup by DVR
The DVR have different layout and functionality for PTZ control.
If the DVR does not provide buttons for PTZ OSD menu, following alternative commands can be used
for EZ610/630 OSD menu:
Set Preset 95
Open OSD menu
Iris open (Iris +) Enter / Set
Iris close (Iris -) ESC / Close OSD menu
SETUP
1. LENS DC
<┘
2. EXPOSURE <┘
3. WHITE BAL. AWB