EverFocus EZ630 - Manual (Page 20)

20
3.3 OSD Menu Setup
3.3.1 OSD Menu Tree
Default settings are shown bold or in brackets.
Lens — DC — Brightness 0~100 (50)
Exposure — Shutter — x256, x128, x64, x32,
x16, x8, x4, x2, 1/60(NTSC) / 1/50
(PAL), FLK,1/250, 1/500, 1/1000,
1/2000, 1/5000, 1/10000
— AGC — HIGH ; MIDDLE ;
LOW ; OFF
— SENS-UP — AUTO (x8) ; OFF
— BLC — OFF
— BLC — Gain — Low, Middle, High
Default, Left/Right,
Width, Top/Bottom,
Height, Return
— HSBLC — Level — 0~8 (5)
Default, Left/Right,
Width, Top/Bottom,
Height, Return
— D-WDR — Off, Indoor, Outdoor
— Return
White Balance — ATW
— AWB
— AWC->SET
— Manual — Red — 0~100 (25)
— Blue — 0~100 (35)
— Return
— Indoor
— Outdoor
— Return
Day/Night — EXT (*)
— Auto — Delay — 0~63 (5)
— S-Level — 0~100 ( 56)
— D-Level — 0~100 ( 6)
— Color (**) (**) (**) (**)
— Black/White — Burst — Off, On
— Return
— Return
3DNR — ON — Level — 0~100 (30)
— Return
— OFF
Special — Camera Title — ON — Characters 0....Z
— OFF
— Return
— D-Effect — Mirror — H_MIR ; V_MIR ; OFF
Gamma — 0.45~1.00
Neg_Image — ON ; OFF
— Return