Yaskawa JVOP-181 USB Copy Unit - Manual (Page 15)

6 Using the Copy Function
YASKAWA ELECTRIC TOBP C730600 25D JVOP-181 Technical Manual 15
While reading, verifying, or copying data between the unit and the
option, the “COM” light on the option will flash, and a message
will appear on the unit’s display screen.
Once the task of reading, copying, or verifying data is complete,
the “COM” light on the option will go out and “ ” will
appear on the unit’s display screen.
• Read
Press and hold the Read button for one second to save
parameters from the unit to the option. While saving settings
from the unit to the option, “
” will flash on the display
screen.
• Verify
Press and hold the Verify button for one second to confirm that
the parameter settings in the unit and the parameter settings
saved to the option match. During this time, “
” will
flash on the display screen.
J1000
RJ-45 Port of
RS232C
Interface
Connected to a
Drive
Unit
Connection
Port
Port Location
STOP
J1000
Co py Ve rif y Re ad LOCK
YA S K A W A
JVOP-181 USB Copy Unit COM
ERR