Yaskawa 1000 Series Operator Mounting Kit NEMA Type 4X - Manual (Page 15)

4 Installation Procedure
YASKAWA TOEP YEAOPT 02A 1000 Series Operator Mounting Kit NEMA Type 4X/IP66 15
4. Assemble each Z-Bracket (qty. 2) to the backside of the Digital Operator (not included in
kit). Use the provided M3x6 screws and tighten to 7 lb-in (0.79 Nm). Refer to Figure 2 .
Figure 2
Figure 2 Z-Bracket Subassembly
5. Mount the Z-Bracket Subassembly from the previous step to the Mounting Bracket
Subassembly. Use the provided #8-32 nuts and tighten to 18 lb-in (2.03 Nm). Refer to
Figure 3 .
Figure 3
Figure 3 Mounting Bracket Assembly