beautypg.com

Tool requirements, 3 receiving – Yaskawa 1000 Series Operator Mounting Kit NEMA Type 4X User Manual

Page 11

background image

3 Receiving

YASKAWA TOEP YEAOPT 02A 1000 Series Operator Mounting Kit NEMA Type 4X/IP66

11

Tool Requirements

Table 4

lists the tools required to install the mounting kit with digital operator on the door of

the enclosure panel.

Table 4 Required Tools

Quantity 1 ea.

UWR0051

Digital Operator Cable 3 ft:
Used to connect the digital operator to the
drive.

Quantity 1 ea.

UWR0052

Digital Operator cable 10 ft:
Used to connect the digital operator to the
drive.

<1> Carefully remove the inner protective plastic film from the mounting bracket membrane prior to kit installation.

The outer protective film can be removed after installation is complete.

Tool

Description

Phillips screwdriver #2

For M3 x 6 screw

Select one:
11/32 inch box end wrench, socket wrench, nut driver or adjustable
wrench.

For #8-32 nut

Select one:
3/8 inch box end wrench, socket wrench, nut driver or adjustable wrench.

For #10-32 nut

Item

Yaskawa Part Number

Description