SMA WB 3000-21 - Manual (Page 12)

3 Product Description SMA Solar Technology AG
12 WB3-5TL-21-BA-en-10 User Manual
Symbols on the Display
I Input voltage/input
current Alternates between input voltage and input
current of one input
K Event number relating
to the small wind
turbine system Event number of errors relating to the small wind
turbine system
L Text line Displays the event message or error message
M Power and yield curve Changes in power over the last 16 feed-in hours
or the energy yields over the last 16 days.
• In order to switch between the displays,
tap once on the enclosure lid.
Symbol Description Explanation
Tapping You can operate the display by tapping on the
enclosure lid:
• Tap once: to activate the backlight, to scroll
to the next text line, to switch between the
power graphs of the last 16 feed-in hours
and the energy yields of the last 16 days
• Tap twice in succession: the display
successively shows the firmware version,
the serial number or designation of the
inverter, Bluetooth NetID, the set country
data set and display language.
Telephone receiver Indicates that an error cannot be rectified on site
• Contact installer.
Spanner Indicates an error that can be rectified on site by
your installer.
• Contact installer.
Bluetooth Indicates that an active Bluetooth connection is
established
Bluetooth connection
quality Indicates the quality of the Bluetooth connection
to other Bluetooth devices.
Speedwire If a Speedwire data module is installed in the
inverter, this symbol shows that there is a
connection to a network
Position Description Explanation