SMA SB 2800i User Manual
Page 26

Device Description
Operating Instructions
24
SMA Regelsysteme GmbH
SB2800i-11:FE0504
Messages of the Sunny Display during initialization
The following messages are displayed during initialization of the
Sunny Boy 2800i.
The installed firmware versions of the control system (BFR) and the
current control processor (SRR) are displayed after 6 seconds.
Messages of the Sunny Display during operation
The Sunny Display presents all relevant operating data one
screen after the other. The images on the side indicate the
messages. Each message is displayed for 5 seconds, after all
messages have been displayed the display starts from the
beginning again.
First the „ E-Today“ (total energy produced on this day) is
displayed together with the current operating status.
The message is followed by the current power and the current
grid voltage.
Finally the accumulated yield of the device since installation is
displayed together with the total operating hours:
Initialization of the display on the
Sunny Boy 2800i
SunnyBoy 2800i
WRxxx-xx
Initialization of the display on the
Sunny Boy 2800i
BFR Version 2.00
SRR Version 2.00
Energy produced today
and current operating status
E-today 3.86kWh
Mode MPP
Current AC Power
and AC voltage
Pac 903W
Uac 195V
Total energy yield and
total operating hours
E-Total 724.4kWh
h-Total 512h