SMA TEMPSENSOR-AMBIENT - Manual (Page 12)

Decommissioning SMA Solar Technology AG
12 TempsensorAmb-IEN110610 Installation Guide
6 Decommissioning
6.1 Disassembling the Ambient Temperature Sensor
1. Remove the Ambient Temperature Sensor cable from the Sunny SensorBox.
2. Insert resistance (100 Ohm) and the bridge to
terminal "F6: TmpAmb" in the Sunny SensorBox.
3. Undo screws on the Ambient Temperature Sensor enclosure and remove the lid.
4. Remove the enclosure from the wall.
☑ The Ambient Temperature Sensor has been disassembled.
6.2 Disposing of the Ambient Temperature Sensor
At the end of its life cycle, dispose of the Ambient Temperature Sensor in accordance with the
applicable disposal regulations for electronic waste at the installation location at the time.
Alternatively, return it labeled as "ZUR ENTSORGUNG" ("for disposal") to SMA Solar Technology
AG, at your own expense.