SMA PT100M-NR - Manual (Page 12)

Configuration SMA Solar Technology AG
12 PT100MNR-IEN083510 Installation Guide
5 Configuration
5.1 Configuring the Sensor with the Sunny Boy Control Plus
To suitably configure the Sunny Boy Control Plus for the connected module temperature sensor,
proceed as follows:
1. Log in to the Sunny Boy Control Plus as the installer.
2. Select the "Settings > Plus I/O > Analog In" menu option in the Sunny Boy Control Plus.
3. Select the input port that is to be configured:
AIN-7 (PT100)
or
AIN-8 (PT100)
4. Under "Function", select the desired temperature unit (e.g. °C).
5. Under "Name", enter the desired sensor name (e.g. ModSens).
☑ The sensor is now configured.
5.2 Configuring the Sensor with the Sunny Central Control
To suitably configure the Sunny Central Control for the connected temperature sensor module,
proceed as follows:
1. Log in to the Sunny Central Control as the installer.
2. Select the "Settings > Connections > Analog In" menu option in the Sunny Boy Control.
3. Select the input port that is to be configured.
4. Under "Function", select the desired temperature unit (e.g. °C).
5. Under "Name", enter the desired sensor name (e.g. module temperature sensor ).
☑ The sensor is now configured. The gain and offset do not require calculating.
Configuring the Sunny Boy Control Plus or Sunny Central Control
Please refer to the Sunny Boy Control Plus user manual for the configuration. In the case of
the Sunny Central Control, the configuration is described in the Sunny Central user manual.