SMA Patch Panel Set - Manual (Page 4)

SMA Solar Technology AG Mounting the Patch Panel Set
Mounting Instructions PPS-MO-IEN114510 4/4
Mounting the Keystone Jack with Patch Cable on the Top-hat Rail
Requirements:
☐ The top-hat rail is mounted.
☐ The opening of the top-hat rail points upwards.
1. Hook the upper part of the top-hat rail adaptor into
the top-hat rail and press the lower part down.
☑ The top-hat rail adaptor snaps into place.
2. Insert the Keystone jack from below into the
opening of the top-hat rail adaptor.
☑ The clip of the Keystone jack snaps in.