SMA Patch Panel Set - Manual (Page 3)

SMA Solar Technology AG Mounting the Patch Panel Set
Mounting Instructions PPS-MO-IEN114510 3/4
8. Insert the cable organiser into the enclosure. Make
sure that the white arrow of the cable organiser is
pointing towards the white arrow on the enclosure.
☑ The cable organiser snaps into place.
9. Push the folding parts of the enclosure back together using a suitable pair of pliers (e.g. plumber
wrench).
☑ The folding parts of the enclosure snap into place with an audible click.
10. Secure the cable retainer of the enclosure with a
cable tie.
11. Cut off the protruding end of the cable tie.