SMA SRC-20 - Manual (Page 8)

5 Mounting SMA Solar Technology AG
8 SRC20-MO-IEN121010 Mounting Instructions
5.2 Mounting the Sunny Remote Control
1. Unscrew the mounting plate from the enclosure of the Sunny Remote Control.
2. Ensure that no cables are laid in the wall which could be damaged when drilling.
3. Mark the position of the drill holes using the mounting plate.
4. Drill the holes.
5. Place the wall plugs provided in the holes and screw in the screws. For this purpose, leave a
6 mm clearance between the screw head and the wall.
6. Screw the mounting plate onto the enclosure of the Sunny Remote Control.
7. Hang the Sunny Remote Control on the screws by means of the wall brackets of the mounting
plate.
8. Connect the Sunny Remote Control to the off-grid inverter/backup inverter (see the installation
manual of the off-grid inverter/the Sunny Backup system).