SMA SC 500CP-10-JP - Manual (Page 40)

6 Communication with the Inverter SMA Solar Technology AG
40 SCCP-JP-BA-A4-en-12 User Manual
6 Communication with the Inverter
6.1 Displaying Instantaneous Values
The SC-COM operating manual contains a detailed description of the user interface.
Procedure:
1. Log into the user interface.
2. Enter the installer password in the appropriate field on the homepage and confirm with [Login].
3. Select Data > Devices.
4. Select
.
☑ A list of the existing device types appears.
5. Select the desired device type.
☑ A list appears containing all existing devices of this type.
6. Select the desired device from the list.
7. Select the tab Instantaneous values.
6.2 Changing Parameters
Parameters are changed via the user interface. You can access the user interface either on site via a laptop or remotely
via a PC.
Procedure:
1. Log into the user interface.
2. Enter the installer password in the appropriate field on the homepage and confirm with [Login].
3. Select PV system > Devices.
4. Select
.
☑ A list of the existing device types appears.
5. Select the desired device type.
☑ A list appears containing all existing devices of this type.
6. Select the desired device from the list.
7. Select the tab Parameters.
8. Change the desired parameter.
9. Confirm the parameter entry with [Save].
6.3 Setting the String-Current Monitoring on the
Sunny Central String-Monitor Controller
To configure the string-current monitoring of the PV system on the Sunny Central String-Monitor Controller, you must
perform the following steps in the given order:
Procedure:
• Detect the Sunny Central String-Monitor Controller and the Sunny Central.
• Set date and time.
• Detect the Sunny String-Monitors via the Sunny Central String-Monitor Controller.
• Redetect the Sunny String-Monitors via the Sunny Central String-Monitor Controller.
• Detect the Sunny String-Monitors via the SC-COM.
• Adjust the identification of the Sunny String-Monitors.