SMA SC CP - Manual

Plomb-BB-IEN112920 | Version 2.0 EN
1 Validity
The sealing kit serves as verification as to whether the inverter has been subject to unauthorized
opening and as protection against manipulation. The sealing kit can be used for the following inverter
types:
• Sunny Central 500CP (SC 500CP-10)
• Sunny Central 630CP (SC 630CP-10)
• Sunny Central 720CP (SC 720CP-10)
• Sunny Central 760CP (SC 760CP-10)
• Sunny Central 800CP (SC 800CP-10)
• Sunny Central 500HE (SC 500HE-20)
• Sunny Central 630HE (SC 630HE-20)
• Sunny Central 720HE (SC 720HE-20)
• Sunny Central 760HE (SC 760HE-20)
• Sunny Central 800HE (SC 800HE-20)
This document describes the actions necessary in order to seal an inverter.
2 Scope of Delivery
Check the delivery for completeness and for any external damage. Contact your retailer if the delivery
is incomplete or you find any damage.
Position Quantity Description
A 20*
* 16 sealing screws are necessary for inverters of the Sunny Central CP production series and 14 sealing screws are
necessary for inverters of the Sunny Central HE-20 production series. The remaining sealing screws are spares.
Sealing screw
SUNNY CENTRAL CP and HE-20
Sealing
Additional sheet