EnGenius Technologies EVR100 - Manual (Page 69)

68
Wireless Filter
Enable Wireless Access
Control
Tick the box to Enable Wireless Access Control.
When Enabled, only wireless clients on the Filtering Table will be allowed.
Description Enter a name or description for this entry.
MAC address Enter the MAC address of the wireless client that you wish to allow connection.
Add Click this button to add the entry.
Reset Click this button if you have made a mistake and want to reset the MAC address and
Description fields.
MAC Address Filtering Table
Only clients listed in this table will be allowed access to the wireless network.
Delete Selected Delete the selected entries.
Delete All Delete all entries
Reset Un-tick all selected entries.