EnGenius Technologies EVR100 - Manual (Page 54)

53
Point-to-Point Tunneling Protocol (PPTP)
WAN Interface Type Select whether the ISP is set to Static IP or will allocate Dynamic IP address.
Hostname This is optional. Only required if specified by ISP
MAC address The MAC Address that is used to connect to the ISP.
Username Username assigned to you by the ISP
Password Password for this username.
Service IP Address The IP Address of the PPTP server.
Connection ID This is optional. Only required if specified by ISP
MTU The maximum size of packets.
Do not change unless mentioned by the ISP.
Type You can choose the method that the router maintains connection with the ISP.
Keep Connection: The device will maintain a constant connection with the ISP.
Automatic Connection: The device will only initiate connection to the ISP when there is an
Internet connection request made from a LAN device.
Manual Connection: The user will need to manually connect to the ISP by clicking the Connect
button.
Idle Timeout: When the connection type is Automatic Connection, when Internet traffic is idle, then the
device will automatically disconnect from the ISP.
Please specify the Idle time in minutes.