Hardware installation – EnGenius Technologies EVR100 User Manual
Page 15
![background image](/manuals/80079/15/background.png)
14
2.3. Hardware Installation
1. Place the unit in an appropriate location after conducting a site survey.
2. Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC/Notebook.
3. Plug one end of another Ethernet cable to WAN port of the device and the other end into you cable/DSL modem
(Internet)
4. Insert the DC-inlet of the power adapter into the port labeled “DC-IN” and the other end into the power socket on the
wall.
This diagram depicts the hardware configuration