ShoreLand'r SMB14TM - Manual (Page 6)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0004008
Page 6 of 9 REV A 5/6/2011
WINCH POST ASSEMBLY
The winch post assembly is pre-assembled and is
shipped banded to the frame. See Diagram B. Place
the winch post on the tongue in the approximate
location. Attach to the tongue using three (3) 3/8” x 4”
hex bolts and 3/8” flange lock nuts. It can be left loose
until the boat is placed on the trailer for final
adjustment.
Place the winch handle on the drive shaft of the winch
by mating the flat sides of the drive shaft with the
punched hole in the winch handle. Secure the handle
to the drive shaft with the 1/2” lock nut provided.
Tighten.