ShoreLand'r LAV22BL - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0004424
Page 7 10/05/2011
SPRINGS
Positions the axle so that it is aligned with the trailer.
Place the springs on the top side of the spring pads welded to the axle.
(See chassis diagram on page 4.) The hook end of the spring must be
mounted to the rear of the trailer. Place a spring clamp on the top center
of the spring. Place the 1/2” X 6-1/2” U-bolts over the top of the spring
clamp, spring and axle. Place the spring and axle U-bolt plate onto the
ends of the two U-bolts. Secure in place with 1/2” lock nuts. Tighten.