ShoreLand'r BK1400US-R V.2 - Manual (Page 2)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003190
REV B
1/20/05
Safety Chain
Insert a 3/8” X 1-1/4” hex bolt with 3/8” flat washer and safety
chain through the lower hole on the front of the tongue. Secure
with a 3/8” flat washer and 3/8” flange lock nut. Repeat this
procedure on the opposite side of the tongue.
Coupler
Mount the coupler to the tongue using two (2) 1/2” X 1” hex
bolts to the front holes and one (1) 1/2” X 4” hex bolt in the
rear hole of coupler. Secure with 1/2” flange lock nuts.
Assembly Instruction
Axles/Springs
Mount the spring to the axle assembly using two (2) 1/2” X
2-5/16” X 5-3/4” square u-bolts over the spring clamp and
spring. Secure this spring to the axle assembly using a spring
plate and four (4) 1/2” flange lock nuts.
Install the spring bracket bushings and 9/16” X 3-1/4” hex
bolts into the rear frame spring shackle. Secure with 9/16”
hex nuts. Hook the leaf spring on the axle assembly over the
bushing just installed.