ShoreLand'r BK1400US-R V.1 - Manual (Page 2)

Safety Chain
Insert a 3/8” X 1-1/4” hex bolt (Ref.#5) with 3/8” flat washer
(Ref.#16) and safety chain (Ref.#25) through the lower hole
on the front of the tongue. Secure with a 3/8” flat washer and
3/8” flange lock nut (Ref.#20). Repeat this procedure on the
opposite side of the tongue.
Coupler
Mount the coupler (Ref.#26) to the tongue using two (2) 1/2”
X 1” hex bolts (Ref.#10) to the front holes and one (1) 1/2” X
4” hex bolt (Ref.#6) in the rear hole of coupler. Secure with 1/
2” flange lock nuts (Ref.#21).
Axles/Springs
Mount the spring (Ref.#35) to the axle assembly using two
(2) 1/2” X 2-5/16” X 5-3/4” square u-bolts (Ref.#12) over the
spring clamp (Ref.#44) and spring. Secure this spring to the
axle assembly using a spring plate (Ref.#45) and four (4) 1/
2” flange lock nuts (Ref.#21).
Assembly Instruction
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003190
Page 2 of 4 REV A
8/22/03
Install the spring bracket bushings (Ref.#43) and 9/16” X 3-
1/4” hex bolts (Ref.#8) into the rear frame spring shackle.
Secure with 9/16” hex nuts (Ref.#22). Hook the leaf spring
(Ref.#3) on the axle assembly over the bushing just installed.
Insert a 9/16” X 3-1/4” hex bolt in the eye of the leaf spring
and secure into the front frame spring shackle. Tighten all
four (4) bolts to secure the under carriage to the trailer.
Tires
Remove the stud thread protectors. Mount the tires (Ref.#30)
to the hubs (Ref.#34) using 1/2” lug nuts (Ref.#19).
OPTIONAL ACCESSORIES:
SS1135
1400U BRAKE KIT (12” or 10” TIRE ONLY)
SSBK1136 FRONT STOP KIT
SSBK1137 RAMP KIT
SS1159 3-SIDE RAIL KIT
SS1160 4-SIDE RAIL KIT
SSBK1183 FRONT SHIELD
SSBK1184 MOTORCYCLE FRONT WHEEL CHOCK KIT