ShoreLand'r BK1400UR - Manual (Page 3)

Safety Chain
Insert a 3/8” X 1-1/4” hex bolt (Ref.#5) with 3/8” flat
washer (Ref.#16) and safety chain (Ref.#25) through the
lower hole on the front of the tongue. Secure with a 3/8”
flange lock nut (Ref.#20). Repeat this procedure on the
opposite side of the tongue.
Coupler
Mount the coupler (Ref.#26) to the tongue using two (2)
1/2” X 1” hex bolts (Ref.#9) to the front holes and one (1)
1/2” X 4” hex bolt (Ref.#6) in the rear hole of coupler.
Secure with 1/2” flange lock nuts (Ref.#21).
Axles/Springs
Mount the spring (Ref.#35) to the axle assembly using
two (2) 1/2” X 2-5/16” X 5-3/4” square u-bolts (Ref.#11)
over the spring clamp (Ref.#45) and spring. Secure this
spring to the axle assembly using a spring plate (Ref.#46)
and four (4) 1/2” flange lock nuts (Ref.#21).
Install the spring bracket bushings (Ref.#44) and 9/16”
X 3-1/4” hex bolts (Ref.#8) into the rear frame spring
shackle. Secure with 9/16” hex nuts (Ref.#22). Hook the
leaf spring (Ref.#35) on the axle assembly over the bush-
ing just installed.
Insert a 9/16” X 3-1/4” hex bolt in the eye of the leaf
spring and secure into the front frame spring shackle.
Tighten all four (4) bolts to secure the under carriage to
the trailer.
Tires
Remove the stud thread protectors. Mount the tires
(Ref.#30) to the hubs (Ref.#43) using 1/2” lug nuts
(Ref.#19).
Assembly Instruction
DECALS:
4811432 SAFETY DECAL - 1400U ...................... 1
4811433 SHORELAND’R UTILITY DECAL .......... 2
OPTIONAL ACCESSORIES:
SS1135
1400U BRAKE KIT (12” or 10” TIRE ONLY)
SSBK1174 FRONT STOP KIT
SSBK1137 RAMP KIT
SS1159 3-SIDE RAIL KIT
SS1160 4-SIDE RAIL KIT
SSBK1183 FRONT SHIELD
SSBK1184 MOTORCYCLE FRONT WHEEL CHOCK KIT
SSBK1185 RAMP EXTENSION KIT
Midwest Industries, Inc. Ida Grove, IA 51445 (800)859-3028 www.shorelandr.com 0002863
Page 3 of 6 REV B 5/09/02