ShoreLand'r TA1032 - Manual

®
TA1032-_ _ Post Load Guide
Position the post load guide mounting bracket (Ref.#7) on the rear cross
member so that the distance between the two post load guides is approximately
2” wider than the boat. Secure the post load guides with the u-bolts (Ref.#6)
positioned down over the mounting bracket (Ref.#7) and the adjustable bunk
bracket clamp (Ref.#1) under the cross member followed by the large clamp
(Ref.#2), two cup washers (Ref.#3), compression springs (Ref.#4), two cup
washers (Ref.#3), and flange lock nuts. Tighten so that the tension on the
springs is enough to guide the boat on the trailer and still have some flexibility.
REF# PART# DESCRIPTION QTY
1 6046200 ADJUSTABLE BUNK BRACKET CLAMP ........... 2
2 S-2410G 1/4” X 1-1/2” X 5-1/4” LARGE CLAMP ................ 2
3 LH308 UP WASHER - PLATED ...................................... 8
4 2121210 3/8” X 3” COMPRESSION SPRING .................... 4
5 1440102 1/2” FLANGE LOCK NUT .................................... 4
6 0310235 1/2” X 3-9/16” X 7-1/4” SQUARE U-BOLT .......... 2
7 6272501 LOAD GUIDE MOUNTING BRACKET - WHT .... 2
-- 6272500 LOAD GUIDE MOUNTING BRACKET - GALV ... 2
-- 6272503 LOAD GUIDE MOUNTING BRACKET - BLK ...... 2
-- 6272506 LOAD GUIDE MOUNTING BRACKET - AW ....... 2
8 61885 33-1/2” LOAD GUIDE TUBE W/CAP .................. 2
TA1032- _ _ MATERIAL LIST
TA1032-_ _ ASSEMBLY INSTRUCTIONS
Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003152
REV A 1/13/04