beautypg.com

ShoreLand'r SS913 User Manual

Ss913 front roller arm assembly

background image

®

SS913

Front Roller Arm Assembly

REF# PART#

DESCRIPTION

QTY

1

0210127 3/8” X 3” CARR BOLT W/1” THRDS 4

2

0210130 3/8” X 3-3/4” CARR BOLT .............. 1

3

0210220 1/2” X 4-1/2” CARR BOLT .............. 1

4

0240210 1/2” X 3 “ CARR BOLT ................... 2

5

1310121 3/4” USS FLAT WASHER ............... 8

6

1410109 3/8” HEX NUT ................................ 1

7

1440102 1/2” FLANGE LOCK NUT ............... 3

8

1540350 BULL RING .................................... 8

9

3510538 MOLDED REAR CROSSMEMBER 1

10

1440100 3/8” HEX LOCK NUT ...................... 4

11

S-3184

PLSTC MOLDED SWIVEL BLOCK 2

12

S-3382

5” ROLLER W/MOLDED HUB ....... 8

13

S-3383

MOLDED ROLLER BUSHING ....... 8

14

66888--

ROLLER ARM MTG BRACKET ..... 1

15

62087

PLASTIC SPACER ......................... 1

16

S-3368

WHITE IN-LINE ROLLER PIN ........ 8

17

S-3384

2” OD X 1.150 ID FLAT WASHER .. 8

18

61913--

ROLLER ARM ................................ 8

19

1340030 3/8” S/TMED LOCK WASHER ....... 1

20

1340095 3/8” USS FLAT WASHER ............... 1

Place the roller arm mounting bracket (Ref.#14) onto the
front crossmember using a 1/2” X 4-1/2” carriage bolt
(Ref.#3) and secure with 1/2” flange lock nut (Ref.#7).
Insert the plastic spacer (Ref.#15) into the roller arm
mounting bracket. Mount the roller assembly into the roller
arm mounting bracket just installed using two (2) 1/2” X 3”
carriage bolt (Ref.#4) and securing the two (2) 1/2” flange
lock nuts (Ref.#7). Adjust the roller assmbly to the proper
position and tighten the 1/2” flange lock nuts. Repeat the
same roller assembly mounting instructions on the opposite
side of the trailer.

Place the 3/8” X 3-3/4” carriage bolt (Ref.#2) through the
hole in the molded crossmember pad (Ref.#9). Place into
position as shown in the drawing. Secure with a 3/8” USS
flat washer (Ref.#20) and 3/8” S/T medium lock washer
(Ref.#19). Secure with 3/8” hex nuts (Ref.#6).

SS913 Front Roller Arm

Mounting Instructions

NOTE: SS913 consists of only one (1) front roller arm assembly.

Midwest Industries, Inc.

Ida Grove, IA 51445

(800)859-3028

www.shorelandr.com

0003040

REV 4/23/02

For 2X5 Frames Only