ShoreLand'r SLXR40TBXLW V.2 - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003460
Page REV A 10/18/06
WINCH POST ASSEMBLY
The height that the bow eye is placed
in your boat will determine the length winch post re-
quired. Once this is determined, attach the winch base
to the tongue with three 1/2” x 4-1/2” carriage bolts
and lock nuts.
Align the holes in the Profile 2000 mounting channel
with the holes in the top of the winch base. Attach the
front of the winch head mounting channel to the base
by placing a 1/2” x 4-1/2” hex bolt through the hole
closest to the front of the winch base. Secure with a
lock nut. Do not tighten.
Note that the winch head can now be rotated either up
or down. Identify the correct hole combination to use
to position the bow eye roller just above the bow eye
of your boat. When determined, secure in this position
by placing the bushing as shown in Diagram C inside
the winch base so it aligns with the hole just identified
for the proper adjustment. Insert another 1/2” x 4-1/2”
hex bolt through the determined mounting hole in the
mounting channel and winch base making sure the
bolt passes through the bushing as well. Secure with
a 1/2” lock nut.
Tighten all bolts.