ShoreLand'r SLXR40TBLW V.1 - Manual (Page 14)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003452
Page 14 REV A 10/18/06
Adjustments are now complete. Double check your
boat for fit. If the desired fit has been achieved, tighten
all fasteners that may have either been left loose or
have been loosened to do the adjusting.
Note: All nuts and bolts must be tightened before tow-
ing. The law requires that the white ground wire on
both the tongue wire harness and vehicle harness be
properly grounded to respective trailer and vehicle
frames.
Recheck all fasteners on the complete trailer to make
sure they are all tight and ready for towing. All fasten-
ers should be periodically checked before towing.
See your ShoreLand’r Owner’s Guide for further
technical information regarding your trailer and its
components.