ShoreLand'r SLXR40TBBLW V.3 - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003456
Page 7
WINCH POST ASSEMBLY
The height that the bow eye is placed
in your boat will determine the length
winch post required. Once this is de-
termined, attach the winch base to the
tongue with three 1/2” x 4-1/2” carriage
bolts and lock nuts.
Align the holes in the Profile 2000
mounting channel with the holes in the
top of the winch base. Attach the front
of the winch head mounting channel to
the base by placing a 1/2” x 4-1/2” hex
bolt through the hole closest to the
front of the winch base. Secure with a
lock nut. Do not tighten.
Note that the winch head can now be
rotated either up or down.
Identify the correct hole combination to
use to position the bow eye roller just
above the bow eye of your boat. When
determined, secure in this position
by placing the bushing as shown in
Diagram C inside the winch base so
it aligns with the hole just identified for
the proper adjustment. Insert another
1/2” x 4-1/2” hex bolt through the deter-
mined mounting hole in the mounting
channel and winch base making sure
the bolt passes through the bushing as
well. Secure with a 1/2” lock nut.
Tighten all bolts.