ShoreLand'r SLXR2314L V.1 - Manual (Page 10)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003366
Page 10 REV A 9/20/06
XR SERIES
The XR-series rear roller rack is installed by placing the
roller arm assembly mounting channel over the rear
cross member and securing in place with a ½” x 4 ¼”
hex bolt and lock nut. (See Detail M). Note that it should
be left loose until the boat is placed on the trailer. Re-
peat on the other roller arm assembly. Once the proper
location is determined, it may be tightened.
The adjustment of the trailer to your boat is very important not
only for the trailer, but also the boat. Failure to do so may lead
to potential failure or damage to either the trailer or boat.