ShoreLand'r SLV23SW User Manual
Page 9
Midwest Industries, Inc.
Ida Grove, IA 51445
800.859.3028
www.shorelandr.com
0003370
Page 9
AXLE
Place one of the spring bracket bushings into
the rear of the spring bracket and secure with
a 9/16” x 3 1/4” hex bolt and hex lock nut.
Repeat in other spring bracket.
Position the axle under the frame, then hook the
hook loop of the spring around the bushings just
installed. Note that if the axle is positioned too low
when trying to hook, the hooks will not hook around
the bushings.
Raise the front of the springs up so they align with
the front hole of the spring bracket. Secure in place
with 9/16” x 3-1/4” hex bolts and lock nuts.
Tighten all axle U-bolts and spring bolts not tightened
at this time.
TIRE & WHEEL ASSEMBLY
Mount the tire and wheel assemblies using the 1/2”
fine threaded tapered lug nuts provided. Tighten to
80-90 ft./lb. of torque using the rotation pattern as
shown in the ShoreLandr’s Owners Manual.
Re-torque the lug nuts after 50 miles of driving and then
periodically thereafter.