ShoreLand'r SLV24BLW - Manual (Page 6)

Place one of the spring bushings (Ref.#44) into the rear of the
spring bracket (Ref.#5) and secure with a 9/16” X 3-1/4” hex bolt
(Ref.#8) and 9/16” hex lock nut (Ref.#21). Repeat on the other
side. Position the axle (Ref.#4) under the frame, then hook the
spring loop around the bushing just installed. Raise the axle
assembly up so the front of the springs (Ref.#39) line up with the
front spring bracket hole. Insert the other two (2) 9/16” X 3-1/4”
hex bolts and 9/16” hex lock nuts. Tighten all nuts and bolts, but
do not over tighten. Allow the spring room enough to move.
Mount the tires and rim assemblies (Ref.#27) using 80-90 ft. lbs.
tongue on lug nuts (Ref.#18) using proper tightening procedures.
Refer to the brake manual for service and maintenance.
Tire Size & Carrying Capacity Chart
Tire Load Carrying
Size Range Capacity
ST185/80R13 C 1480 lbs. per/tire
Refer to the tire side wall for the correct tire pressure.