ShoreLand'r SLRB40TCBXLW - Manual (Page 13)

Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0004276
Page 13 of 15 10/25/2010
RB SERIES
The RB-series rear bunk assembly is installed by placing
the bunk assembly mounting channel over the rear cross
member and securing in place with a 1/2” x 4-1/4” hex bolt
and lock nut. (See Diagram A). Place the assembly on the
equiload bunk arm and secure by placing a 3/8” x 1” hex
bolt through the bracket on the bunk and the ear on the end
of the equiload arm. Secure in place using a 3/8” lock nut.
Repeat on the other end of the arm. Tighten only enough to
hold in position until the boat is placed on the trailer. Repeat
on the other RB-bunk assembly.