ShoreLand'r SLRB46TABS - Manual (Page 13)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003721
Page 13 11/27/06
RB SERIES
The RB-series rear bunk assembly is installed by placing the bunk
assembly mounting channel over the rear cross member and se-
curing in place with a 1/2” x 4-1/4” hex bolt and lock nut. (See Dia-
gram A). Tighten only enough to hold in position until the boat is
placed on the trailer. Repeat on the other RB-bunk assembly.
The short stabilizer bunk is installed to the adjustable bunk bracket
on the front cross member with a 3/8” x 1” hex bolt and lock nut.
(See Diagram A, Detail B).