ShoreLand'r SLRB30BLW V.2 - Manual (Page 3)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003434
Page 3
FINAL ASSEMBLY INSTRUCTIONS
Remove the hardware bag from the frame, remove parts
and sort by size.
RB SERIES
The RB -series rear bunk assembly is installed by placing
the bunk assembly mounting channel over the rear cross-
member and securing in place with a 1/2” x 4-1/4” hex bolt
and lock nut. (See Diagram A). Tighten only enough to hold
in position until the boat is placed on the trailer. Repeat on
the other RB-bunk assembly.
The short stabilizer bunk is installed to the adjustable bunk
bracket on the front cross member with a 3/8” x 1” hex bolt
and lock nut. (See Diagram A, Detail B).