ShoreLand'r SLRB2314L User Manual
Page 9
Midwest Industries, Inc.
Ida Grove, IA 51445
800.859.3028
www.shorelandr.com
0003364
Page 9
AXLE
Place one of the spring bracket bushings
into the rear of the spring bracket and
secure with a 9/16” x 3 1/4” hex bolt and
hex lock nut.
Repeat in other spring bracket.
Position the axle under the frame, then
hook the hook loop of the spring around
the bushings just installed. Note that if
the axle is positioned too low when trying
to hook, the hooks will not hook around
the bushings.
Raise the front of the springs up so they
align with the front hole of the spring
bracket. Secure in place with 9/16” x
3-1/4” hex bolts and lock nuts.
Tighten all axle U-bolts and spring bolts not
tightened at this time.
TIRE & WHEEL ASSEMBLY
Mount the tire and wheel assemblies
using the 1/2” fine threaded tapered lug
nuts provided. Tighten to 80-90 ft./lb. of
torque using the rotation pattern as shown
in the ShoreLandr’s Owners Manual.
Re-torque the lug nuts after 50 miles of
driving and then periodically thereafter.