ShoreLand'r SLR40TABBXLW - Manual (Page 6)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003730
Page 6 11/29/06
WINCH POST ASSEMBLY
The height that the bow eye is placed in your boat will
determine the length winch post required. Once this is
determined, attach the winch base to the tongue with
three 1/2” x 4-1/2” carriage bolts and lock nuts.
Align the holes in the Profile 2000 mounting channel
with the holes in the top of the winch base. Attach the
front of the winch head mounting channel to the base
by placing a 1/2” x 4-1/2” hex bolt through the hole
closest to the front of the winch base. Secure with a
lock nut. Do not tighten.
Note that the winch head can now be rotated either up
or down. Identify the correct hole combination to use to
position the bow eye roller just above the bow eye
of your boat. When determined, secure in this posi-
tion by placing the bushing as shown in Diagram
C inside the winch base so it aligns with the hole
just identified for the proper adjustment. Insert an-
other 1/2” x 4-1/2” hex bolt through the determined
mounting hole in the mounting channel and winch
base making sure the bolt passes through the
bushing as well. Secure with a 1/2” lock nut.
Tighten all bolts.