ShoreLand'r SLR2313BS V.2 - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003388
Page 7
WINCH POST ASSEMBLY
The height that the bow eye is placed in your boat will de-
termine the length winch post required. Once this is deter-
mined, attach the winch base to the tongue with three 1/2”
x 4-1/2” carriage bolts and lock nuts.
Align the holes in the Profile 2000 mounting channel with
the holes in the top of the winch base. Attach the front of
the winch head mounting channel to the base by placing a
1/2” x 4-1/2” hex bolt through the hole closest to the front of
the winch base. Secure with a lock nut. Do not tighten.
Note that the winch head can now be rotated either up
or down. Identify the correct hole combination to use to
position the bow eye roller just above the bow eye of your
boat.
When determined, secure in this position by placing the
bushing as shown in Diagram C inside the winch base so
it aligns with the hole just identified for the proper adjust-
ment. Insert another 1/2” x 4-1/2” hex bolt through the de-
termined mounting hole in the mounting channel and winch
base making sure the bolt passes through the bushing as
well. Secure with a 1/2” lock nut. Tighten all bolts.