ShoreLand'r SL40TBAL - Manual (Page 8)

Midwest Industries, Inc. Ida Grove, IA 51445 (800)859-3028 www.shorelandr.com M301237
Page 8
RB SERIES
The RB-series bunks are installed by placing the RB arm
assembly mounting channel over the rear cross member and
securing in place with a 1/2” x 4-1/4” hex bolt and lock nut. (See Detail
P). Note that it should be left loose until the boat is placed on the trailer.
Once the proper position is determined, it may be tightened. Repeat on
the other RB arm assembly.
The short stabilizer bunk is installed to the adjustable bunk bracket on
the front cross member with a 3/8” x 1” hex bolt and lock nut. (See
Detail N).