ShoreLand'r SLB34BLW User Manual
Page 7
Midwest Industries, Inc.
Ida Grove, IA 51445
800.859.3028
www.shorelandr.com
0003441
Page 7
WINCH POST ASSEMBLY
The height that the bow eye is placed in
your boat will determine the length of
winch post required. Once this is deter-
mined, attach the winch base to the tongue
with three 1/2” x 4” carriage bolts and lock
nuts.
Align the holes in the Profile 2000 mount-
ing channel with the holes in the top of the
winch base. Attach the front of the winch
head mounting channel to the base by
placing a 1/2” x 4-1/2” hex bolt through the
hole closest to the front of the winch base.
Secure with a lock nut. Do not tighten.
Note that the winch head can now be ro-
tated either up or down. Identify the cor-
rect hole combination to use to position the
bow eye roller just above the bow eye of
your boat. When determined, secure in this
position by placing the bushing as shown in
Diagram C inside the winch base so it aligns
with the hole just identified for the proper
adjustment. Insert another 1/2” x 4-1/2” hex
bolt through the determined mounting hole
in the mounting channel and winch base
making sure the bolt passes through the
bushing as well. Secure with a 1/2” lock nut.
Tighten all bolts.