ShoreLand'r SL60TAL V.1 - Manual (Page 13)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003354
REV C 4/28/06 Page 13
Detail L
Rear Bunk Assembly
Mount the rear bunk support weldments to the pivot
weldments by placing them in the channel of the pivot
weldments and attaching with 1/2” X 4-1/2” stainless
steel hex bolts and 1/2” stainless steel lock nuts. See
Detail L. Place the bunk assembly over the support
weldment, align the holes of the bunk brackets with
the holes in the support weldment and secure using
1/2” X 1-1/2” stainless steel hex bolts and 1/2” stain-
less stee lock nuts. Tighten but do not over tighten
because the bunk must rotate to conform to the boat
bottom.