ShoreLand'r RB2313L - Manual (Page 10)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003384
Page 10 REV A 9/07/06
RB Series
The RB -series rear bunk assembly is installed by placing
the bunk assembly mounting channel over the rear cross
member and securing in place with a 1/2” x 4-1/4” hex bolt
and lock nut. (See Diagram A). Note that it should be left
loose until the boat is placed on the trailer. Repeat on the
other roller arm assembly. Once the proper positions is
determined, it may be tightened.
The short stabilizer bunk is installed to the adjustable bunk
bracket on the front cross member with a 3/8” x 1” hex bolt
and lock nut. (See Diagram A, Detail B).