Physical description and compatibility – Ericsson LBI-38965B User Manual

Page 8

LBI-38965

PHYSICAL DESCRIPTION AND COMPATIBILITY

2. PHYSICAL DESCRIPTION AND COMPATIBILITY

This section outlines the specifications, depicts the physical architecture, and provides compatibility information for the

BCU/CAL.

Software for the BCU and the CAL are merged into one software package. Feature encryption allows or disallows BCU

or CAL functionality. The two products can also run on the same hardware platform with minor additions for CAL.

2.1. PHYSICAL SPECIFICATIONS

General Specifications

BCU/CAL:
ELMA VME System 12 7-slot enclosure with PSU and integral cooling fan
TVME 147 single-board computer with TVME 712/M Transition Module
Formation WANServer fv5310
Maxtor MXT-1240S 1.2 GB 3½" half-height 8.5ms hard disk drive, internal
Teac FD235HS-711 1.44 MB 3½" half-height floppy disk drive, internal

Tape Drive (Optional with BCU only):
Archive/Maynard 4324NP 4/8 GB 3½" half-height 4mm digital audio tape (DAT) drive, internal

Console Terminal:
DEC VT100 or compatible console terminal

Terminal Servers (CAL only)
Emulex Performance Series P2516-SLTL (16 ports per terminal server)

Power Supply

BCU/CAL:
115/230 VAC, 47-63 Hz, 500 W

Physical (EGE Standard Cabinet)

BCU/CAL:
6 rack units: 26.67 cm (10.5 in.) high x 48.26 cm (19 in.) wide x 49.99 cm (19.68 in.) deep

Environmental

Storage Temperature:

-40 to +85

Operating Temperature:

0 to 40

C (ambient)

Operating Altitude:

< 15,000 feet

Shipping Altitude:

< 50,000 feet

Relative Humidity:

< 90% (non-condensing)