ShoreLand'r ADSS-8 - Manual (Page 7)

Handrail Assembly Instructions
Locate the handrails. Note that the holes in the
handrails are at different distances from the ends of
the rail. Position the handrails so that the end with
the hole 2-1/2” from the end is attached to the
bottom leg frame weldments. Attach the rails to the
leg frames by placing a 3/8” x 1-3/4” bolt through the
rail, then insert the bolt through the hole provided in
the leg frame. Secure with a 3/8” acorn lock nut.
Repeat this process on the other end of rail and on
other rails
.
Final Installation Instructions
Note that the extension legs are not provided with the dock steps because every application will require
its own length of legs. Legs are available in the following lengths: 10”, 17”, 31”, 49”, & 61”. Purchase the
leg length that best fits your application.
Once the steps are in their permanent location, tighten all nuts and bolts loosened during assembly.
Assembly is complete.
Safety Instructions
Safety Tips for Lifting and Carrying
• Make sure you have help installing this product.
The weight of this unit is 142 lbs.
• Make sure your footing is solid.
• Get close to the load.
• Keep your back straight.
• Center your body over your feet.
• Lift with your legs.
• Move your feet to turn - Don’t twist.
• Use mechanical assistance if it’s available. • Clear a pathway for carrying.
• Communicate with lifting partners when
lifting/carrying.
• Take small steps when carrying.
• Signal lifting partners when ready to lift and set
down.
• Keep hands clear when folding and unfolding rail
bundle.
• Steps may slippery when wet - Use handrails.
Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorestation.com 0003518
Page 7 of 7 REV C 03/24/2011